From their 'Firecube' range of state-of-the-art wood burning stoves, the Burley Launde 9304-C is both DEFRA approved and EcoDesign 2022 compliant. With a nominal heat output of 4kW, it's a great stove for those looking to heat smaller rooms where you can be assured that you are generating the maximum heat from the wood you burn.
The catalytic converter within the Launde 9304-C aids complete combustion by turning carbon monoxide into carbon dioxide, releasing more energy in the process and therefore the stove with catalytic converter will generally have lower CO and higher efficiency than the stove without. Burley’s research and design has ensured the catalytic converters are working in the perfect temperature band, therefore with normal use they are rated for over 10,000 hours use. Unlike many other catalytic stoves,with average use Burley’s cat’s will never need replacing.
The Burley Launde can be used with an optional Base Plinth, several bases can be used to raise the stove to the desired level, creating a more Scandinavian look with beautiful clean parallel lines.
Simple and modern in design, the Launde 9304-C is constructed from steel. The plate steel sections are 5mm and 8mm thick and are welded by robots with the welds applied in exactly the right place and in exactly the right thickness resulting in the steel sections being melted and fused together to make a virtually indestructible construction. Weighing in at 57kg, you can be assured that this cutting-edge stove is built to last giving years of dependable service.
Included free with the Launde 9304-C is Burley's 'Thank You' pack which typically contains:
- Spanner to attach and adjust the tension of the air control lever
- Coaster to protect the top of your stove
- Moisture Meter to ensure your wood is dry
- Stove Paint in case you prefer black handles or ever need to touch up any paint work
- Heat Resistant Glove
- Scoop for removing ash
- Allen Key should you wish to adjust the door handle
- A Mug to enjoy a cup of tea whilst admiring the fantastic flame picture
The contents of the kits vary from model to model, so not all the items listed or shown above may be included with your stove.
Key features of the Burley Launde 9304-C Catalytic Converter Wood Burning Stove can be found below.
|Brand ||Burley |
|Model || |
|Country of Manufacture ||United Kingdom |
|Heater Type ||Wood Burning Stove |
|Nominal Heat Output ||4.0kW |
|Maximum Heat Output ||5.3kW |
|Efficiency (Net) ||84.9% |
|Dust (mg/m3) ||12 |
|Particulates (gr/h) ||0.1 |
|Carbon Monoxide ||0.1 |
|Nitrous Oxides ||122 |
|Hydrocarbons ||56 |
|DEFRA Approved ||Yes |
|EcoDesign Compliant ||Yes |
|Airwash System ||Yes |
|CO concentration @ 13% Oxygen ||0.28% |
|Maximum Log Length ||250mm (10") |
|Weight ||57kg |
|Air Vent requirement ||Not required |
|Minimum flue draught mm H2O ||0.5mm |
|Flue Gas temperature ||156ºC |
|Spigot temp ||253ºC |
|Flue Size (top exit) ||127mm (5") |
|Minimum chimney diameter ||127mm (5") |
|Minimum distance to combustible materials. |
All other distance as per Building regulations
Part J or HETAS recommendations
|20cm behind (8") |
40cm at side (16")
40cm to top
|Warranty ||5 Years |
The dimensions (width, height, depth) of the Burley Launde 9304-C Catalytic Converter Wood Burning Stove are listed here.
Optional Base Plinth 114mm high
Please note: Due to rising freight charges, we are now being forced to charge extra for delivery to Highland postcodes.
Due to the size and weight, all Burley Wood Burning Stoves will be delivered to you on a palletised delivery service. All pallet deliveries are kerbside/front door delivery only, so please arrange adequate means to take your order into your home. Under normal circumstances this may take 2 people.
Current delivery times for the Burley Launde 9304-C is approximately 7-10 days however, this is dependant on stock levels at time of placing an order. Once an order is placed, we will contact you to advise if there is likely to be any delays on the estimated delivery time.
We understand that from time to time some of our customers may change their mind or simply not be pleased with their chosen products once delivered and/or installed. Our returns policy should hopefully help with the process of returning your order in this instance. Please feel free to contact us should you have any further queries.