The Ekofires 6030 is designed to recreate the character of a real woodburner. Real flames rising from a log effect fuel bed will provide ambience and warmth to your home. A major appealing factor with the 6030 is the fact that as a flueless gas appliance, it can be fitted into properties that do not have a chimney or flue. This makes it ideal for new build houses, extensions and conservatories where you can enjoy the charm of this attractive design with straightforward installation.
The only requirements for the Eko 6030 are a minimum room size of 35m³ (length x width x height - typically 12’6” x 12’6” x 8’) and a standard 100cm² air-vent in the room where the fire is fitted. Fitted with safety features including an oxygen depletion sensor which will automatically shut the fire off if harmful fumes were detected.
The Eko 6030 flueless fire incorporates the latest in gas fire technology. Instead of requiring a chimney or flue to expel the gases produced, the combustion gases pass through a catalytic converter system, positioned at the top of the appliance which converts carbon monoxide into harmless carbon dioxide and water vapour, levels of which are so low they are typically present in fresh air. In fact, the catalytic converter works so effectively that it can actually help to clean the air by neutralising airborne particles and odours, therefore helping to reduce household allergies.
The 6030 is ideal for installation within a fireplace or sat on a suitable hearth against a flat wall as a free-standing feature. The clean lines ensure it will complement both classical and contemporary interiors whilst the large glass viewing window provides a perfect view of the flames.
Steel body in classic matt black paint or for those looking to brighten up their fireplace, the 6030 is also available in a modern white or stylish burgundy finish. And, finally to add detail and complement the overall aesthetic, a matching door handle and slide control handle is finished in brushed stainless steel. Clever operation using the discreet silver slide control giving full operation of on/off and flame height adjustment where the air controls would normally by located on a real wood stove at the front of the appliance.
In addition to these benefits, the Eko 6030 flueless stove should be significantly cheaper to install and run. The flueless stove engine features all the benefits of innovative catalytic technology; 100% efficiency, reduced running costs, simple installation and a new clean burning ribbon burner. As no chimney is required 100% of the heat is distributed into the room, making this stove not only an extremely reliable source of heat but a very affordable one too.
(Manufacturers instructions are offered as a guide only and may not always be the latest version)
Key features of the Ekofires 6030 Flueless Gas Stove can be found below.
|Fire Type ||Stove (Inset S35G) |
|Gas Type ||Natural Gas |
|Efficiency ||100% |
|Minimum Room Size ||35m³ |
|Control Type ||Slide |
|Flame/Fuel Effect ||Ribbon Flame - Logs |
|Open or Glass Fronted ||Glass Fronted |
|Heat Input (Max/Min) Gross ||3.1kW / 1.5kW |
|Heat Output (Max/Min) Gross ||3.1kW / 1.5kW |
|Installation ||Free-Standing |
|Air Vent Required ||100cm² |
|Safety ||Oxygen Depletion Sensor / Flame Failure Device / Catalytic Converter |
|Guarantee ||3 Years |
The dimensions (width, height, depth) of the Ekofires 6030 Flueless Gas Stove are listed here.
|A ||B ||C |
Please note: Due to rising freight charges, we are now being forced to charge extra for delivery to Highland postcodes.
Standard sized fires such as the Eko 6030 will be delivered using a Premier courier service. We will contact you to book-in a suitable delivery date as soon as we're ready to dispatch your item(s). The courier service we use has a service where they will send you a text message on the morning of the delivery to advise on a 1 hour time slot when your item(s) will arrive.
Current delivery times for the 6030 Flueless Gas Stove is approximately 5 days however, this is dependant on stock levels at time of placing an order. Once an order is placed, we will contact you to advise if there is likely to be any delays on the estimated delivery time.
We understand that from time to time some of our customers may change their mind or simply not be pleased with their chosen products once delivered and/or installed. Our returns policy should hopefully help with the process of returning your order in this instance. Please feel free to contact us should you have any further queries.