The Verine Quasar is a versatile, open-fronted gas fire that has been designed to fit into all flue types including pre-cast flues subject to adequate inset depth being available. It is also suitable for installation into a standard brick chimney without the need to remove the chairbrick.
It is supplied with numerous options allowing you to create the perfect fire for any setting. You have the option of selecting a glowing coal fuel bed plus with a huge selection of Verine's exclusive trims and frets, you can create a unique fire that compliments your fireplace perfectly.
Designed to fit into a standard fireplace cut-out, the Verine Quasar gas fire has a control option to suit everyone's needs. The standard manual Piezo control is discreetly hidden at the bottom of the appliance behind the removable fret drawer. For anyone who prefers not to bend right down to operate the fire, you can select a slide control. Located at the top, side of the fire's trim, the slide control gives you full control of the flame height at a higher level. For the ultimate in ease of use, a hand-held remote control system (fully automatic) is also available.
The realistic, living flame gas fire is capable of producing up to 2.7kW of heat and with the maximum gas input being less than 7kW, additional ventilation (air-vent) is not normally needed.
The Verine Quasar is a popular choice for anyone looking for a authentic looking feature fire that has the looks of a real coal fire but with the convenience of gas.
To view the range of Trims and Frets available with this fire please see link - Verine Trims and Frets
(Manufacturers instructions are offered as a guide only and may not always be the latest version)
Key features of the Verine Quasar Gas Fire can be found below.
|Fuel ||Natural Gas |
|Flue Compatibility ||Brick Chimney / Pre-Fabricated / Pre-Cast |
|Type of Heat ||Radiant |
|Fuel Effect ||Coal |
|Direct Heat Output ||2.7kW |
|Energy Efficiency ||This product is not suitable for primary heating purposes |
|Open or Glass Fronted ||Open |
|Control ||Manual / Slide / Remote |
|Safety ||Flame Supervision Device / Oxygen Depletion Sensor |
|Air Vent Required? ||Not Normally Needed |
|Warranty ||15 Years |
The dimensions (width, height, depth) of the Verine Quasar Gas Fire are listed here.
Please note: Due to rising freight charges, we are now being forced to charge extra for delivery to Highland postcodes.
Standard gas fires such as the Verine Quasar gas fire will be delivered using a Premier courier service. We will contact you to book-in a suitable delivery date as soon as we're ready to dispatch your item(s). The courier service we use has a service where they will send you a text message on the morning of the delivery to advise on a 1 hour time slot when your item(s) will arrive.
Current delivery times for the Verine Quasar is approximately 7 days however, this is dependant on stock levels at time of placing an order. Once an order is placed, we will contact you to advise if there is likely to be any delays on the estimated delivery time.
We understand that from time to time some of our customers may change their mind or simply not be pleased with their chosen products once delivered and/or installed. Our returns policy should hopefully help with the process of returning your order in this instance. Please feel free to contact us should you have any further queries.