A popular gas fire for contemporary styled interiors, the Verine Orbis Plus combined with a one-piece, designer fascia gives the fire a clean, modern look. You have the option of choosing a 3-sided fascia allowing you to fit the fire into a standard fireplace opening or a 4-sided, Frontier fascia designed for fitting the fire on its own raised up on the wall.
The full-depth Verine Orbis Plus is a convector fire producing a remarkable 4.1kW of radiant and convected heat. Using the latest gas fire technology, Verine have managed to increase the efficiency rating compared to most other open-fronted models resulting in less heat lost up the chimney combined with one of the highest heat outputs for a 16" inset gas fire.
The fascias offered are available in both the Essence and Frontier style and in a variety of beautiful finishes to blend well into any interior. The deep fuel bed provides an appealing, ambient effect with dancing flames over glowing coals. Suitable for both Class 1 (real chimney) and Class 2 pre-fabricated flues subject to adequate depth available to accommodate the Orbis Plus's 223mm inset depth.
Choose the control option that suits your lifestyle best. Manual control located at the bottom of the fire, slide control located at the top, side of the trim or a fully automatic remote control for armchair operation.
When combined with the Essence fascia, you can choose any of the control options. The hearth mounted Frontier fascia is available with manual or remote control option. The 4-sided, wall-mounted Frontier fascia is only available with the remote control option.
All control options suitable for Natural Gas. Slide control version can be specified for LPG properties.
View Choice of Fascia Options HERE
(Manufacturers instructions are offered as a guide only and may not always be the latest version)
Key features of the Verine Orbis Plus Gas Fire - Fascia Model can be found below.
|Fuel ||Natural Gas (LPG on slide control only) |
|Flue Compatibility ||Brick Chimney / Pre-Fabricated |
|Type of Heat ||Radiant & Convected |
|Fuel Effect ||Coal |
|Direct Heat Output ||4.1kW |
|Energy Efficiency ||68.3% |
|Control ||Manual (Essence & hearth-mounted Frontier fascia) / Slide (Essence fascia only) / Remote (all fascia options) |
|Safety ||Flame Supervision Device / Oxygen Depletion Sensor |
|Air Vent Required? ||Not Normally Needed |
|Warranty ||15 Years |
The dimensions (width, height, depth) of the Verine Orbis Plus Gas Fire - Fascia Model are listed here.
Please note: Due to rising freight charges, we are now being forced to charge extra for delivery to Highland postcodes.
Standard gas fires such as the Verine Orbis Plus gas fire (Fascia model) will be delivered using a Premier courier service. We will contact you to book-in a suitable delivery date as soon as we're ready to dispatch your item(s). The courier service we use has a service where they will send you a text message on the morning of the delivery to advise on a 1 hour time slot when your item(s) will arrive.
Current delivery times for the Verine Orbis Plus (Fascia model) is approximately 7 days however, this is dependant on stock levels at time of placing an order. Once an order is placed, we will contact you to advise if there is likely to be any delays on the estimated delivery time.
We understand that from time to time some of our customers may change their mind or simply not be pleased with their chosen products once delivered and/or installed. Our returns policy should hopefully help with the process of returning your order in this instance. Please feel free to contact us should you have any further queries.