The Verine Orbis HE is a full-depth, inset convector gas fire with a glass front that boasts an incredible efficiency of 86.3% combined with a powerful, 4kW maximum heat output.
This is a extremely popular fire for anyone looking to replace their existing, inefficient gas fire for a stylish, state-of-the-art appliance that will help to reduce energy bills. The deep, realistic coal bed with dancing flames will add warmth and ambience to any room and with a vast selection of trims and frets, you can be sure that there is a option to suit your home perfectly!
Whilst ideally suited to Class 1 flues (brick chimney), the Verine Orbis HE high efficiency gas fire can also be fitted into pre-fabricated flues subject to you having adequate depth available to accommodate the fires 230mm inset depth.
Available as standard with manual controls located at the base of the appliance discreetly concealed behind removable fret drawer. The slide control option which is a neat lever located on the top, right hand side trim gives you total control of the fire including on/off and does not require bending right down to operate or the Orbis HE can also be supplied as a fully automatic remote control model giving you the ability to control all the fires features without leaving your chair! Mains electric connection is not required with any of the control options.
As you would expect from a premium brand such as Verine, the Orbis HE incorporates the very latest safety features such as Flame Supervision Device and Oxygen Depletion Sensor which automatically shuts the fire off in the unlikely event that fumes enter the room.
Natural gas or LPG models available (LPG only offered as slide control). Additional ventilation such as an air-vent is not normally required with this fire.
To view the range of Trims and Frets available with this fire please see link - Verine Trims and Frets
(Manufacturers instructions are offered as a guide only and may not always be the latest version)
Key features of the Verine Orbis HE Gas Fire can be found below.
|Fuel ||Natural Gas (LPG available as slide control only) |
|Flue Compatibility ||Brick Chimney / Pre-Fabricated |
|Type of Heat ||Radiant & Convected |
|Fuel Effect ||Coal |
|Direct Heat Output ||LPG: 4.0kW / Natural Gas: 3.9kW |
|Energy Efficiency ||86.3% |
|Control ||Manual / Slide / Remote |
|Safety ||Flame Supervision Device & Oxygen Depletion Sensor |
|Air Vent Required? ||Not Normally Needed |
|Warranty ||15 Years |
The dimensions (width, height, depth) of the Verine Orbis HE Gas Fire are listed here.
Please note: Due to rising freight charges, we are now being forced to charge extra for delivery to Highland postcodes.
Standard gas fires such as the Verine Orbis HE high efficiency gas fire will be delivered using a Premier courier service. We will contact you to book-in a suitable delivery date as soon as we're ready to dispatch your item(s). The courier service we use has a service where they will send you a text message on the morning of the delivery to advise on a 1 hour time slot when your item(s) will arrive.
Current delivery times for the Verine Orbis HE is approximately 7 days however, this is dependant on stock levels at time of placing an order. Once an order is placed, we will contact you to advise if there is likely to be any delays on the estimated delivery time.
We understand that from time to time some of our customers may change their mind or simply not be pleased with their chosen products once delivered and/or installed. Our returns policy should hopefully help with the process of returning your order in this instance. Please feel free to contact us should you have any further queries.