The Ekofires 6030 is designed to recreate the character of a real woodburner. Real flames rising from a log effect fuel bed will provide ambience and warmth to your home. A major appealing factor with the 6030 is the fact that as a flueless gas appliance, it can be fitted into properties that do not have a chimney or flue. This makes it ideal for new build houses, extensions and conservatories where you can enjoy the charm of this attractive design with straightforward installation.
The only requirements for the Eko 6030 are a minimum room size of 35m³ (length x width x height - typically 12’6” x 12’6” x 8’) and a standard 100cm² air-vent in the room where the fire is fitted. Fitted with safety features including an oxygen depletion sensor which will automatically shut the fire off if harmful fumes were detected.
The Eko 6030 flueless fire incorporates the latest in gas fire technology. Instead of requiring a chimney or flue to expel the gases produced, the combustion gases pass through a catalytic converter system, positioned at the top of the appliance which converts carbon monoxide into harmless carbon dioxide and water vapour, levels of which are so low they are typically present in fresh air. In fact, the catalytic converter works so effectively that it can actually help to clean the air by neutralising airborne particles and odours, therefore helping to reduce household allergies.
The 6030 is ideal for installation within a fireplace or sat on a suitable hearth against a flat wall as a free-standing feature. The clean lines ensure it will complement both classical and contemporary interiors whilst the large glass viewing window provides a perfect view of the flames.
Steel body in classic matt black paint or for those looking to brighten up their fireplace, the 6030 is also available in a modern white finish. And, finally to add detail and complement the overall aesthetic, a matching door handle and slide control handle is finished in brushed stainless steel. Clever operation using the discreet silver slide control giving full operation of on/off and flame height adjustment where the air controls would normally by located on a real wood stove at the front of the appliance.
In addition to these benefits, the Eko 6030 flueless stove should be significantly cheaper to install and run. The flueless stove engine features all the benefits of innovative catalytic technology; 100% efficiency, reduced running costs, simple installation and a new clean burning ribbon burner. As no chimney is required 100% of the heat is distributed into the room, making this stove not only an extremely reliable source of heat but a very affordable one too.
(Manufacturers instructions are offered as a guide only and may not always be the latest version)