Gallery PD9 Electric Fire

The modular design of the Gallery PD9 electric fire allows it to be fitted into a selection of cast iron inserts and combination fireplaces from the Gallery Collection range. Ideal for those which may have been used for a solid fuel fire or for homes without the required flue for gas, it will allow you to easily create a cosy atmosphere by illuminating the fire chamber.

A moulded tapered section with low energy and long life LED bulbs lights up to to give the illusion of a glowing fire bed with a coal effect on top. Beneath this is a concealed fan heater capable of producing 900W or 1800W of heat which is expelled from the bottom of the appliance. The illumination has four settings; slow flicker, regular flicker, fast flicker and circulatory flicker.

Enjoy the glow effect whenever you like and when the rooms gets chilly, just move the insert ashpan over to one side to allow the heat to distribute into the room. Operated by a remote control with a 3 metre range plus manual override controls at the base of the PD9 engine.

Please note: This appliance has been specifically made to fit the cast inserts and combination fireplaces listed below. It will not fit other makes and models of inserts:

• Gallery Art Nouveau insert
• Gallery Sovereign insert
• Gallery Toulouse insert
• Gallery Tulip insert

PLEASE ONLY ORDER THIS FIRE IF YOU HAVE ONE OF THE CAST IRON INSERTS ABOVE. WHILST MOST CAST IRON INSERTS MAY LOOK THE SAME SIZE, THE GALLERY PD9 ELECTRIC FIRE IS ONLY COMPATIBLE WITH THE INSERTS LISTED ABOVE AND WILL NOT FIT OTHER MODELS.

Download Instructions
(Manufacturers instructions are offered as a guide only and may not always be the latest version)