Burley Environ Flueless Gas Fire

Burley Environ Flueless Gas Fire

The Environ range of flueless gas fires from Burley is available in a wide variety of styles and is the perfect way to enjoy real, flickering flame even if your property doesn't have a chimney or flue. Suitable for inset installation into a fireplace or can be made free-standing using the optional spacer.

Fire Model:  
Gas:  
Fuel Effect:  
Control:  
Environ Spacer:  
Burley
£450.00
RRP: £530.00

The Burley Environ is flueless gas fire designed for installation into a standard fireplace opening. It boasts a real flame set behind a glass panel and benefits from not requiring a chimney or flue. The state-of-the-art technology used incorporates a catalytic converter which converts the carbon monoxide created during the combustion process into carbon dioxide (which is harmless and is present in fresh air). Burley has NEVER had a catalytic converter fail or need replacing.

A flueless gas fire can be fitted in minutes rather than several hours. It is an extremely simple and problem free operation provided the Gas Safe registered fitter follows the installation instructions. If it is to go in an open chimney, then the flue must be blocked. Apart from that the fire just needs connecting and testing, and a 100cm² air vent fitting.

When fitting a flueless fire such as the Burley Environ, it does not need to be sealed to the fireplace opening and flueless gas fires do not have to be installed on an outside wall. As no flue is required, thousands of pounds can be saved by not building a new chimney or restoring a condemned one.

With all the heat entering the room, the Environ boast a 100% efficiency rating and has a maximum output of 2.5kW. A minimum room size of 30m³ (length x width x height) and as per Building Regulations Part J, an air vent which provides not less than 100cm2 free air must be installed in the room, at least 1 metre away from the fire. A chimney, ceiling or floor vent is not suitable.

For classical homes, the Environ 4240 and 4248 are popular options or for modern interiors the 4242 and 4247 offer a more contemporary feel. All models feature cream brick-effect interior and coal fuel effect with the exception of the 4247 which has a black interior with pebbles.

Recess requirement of 95mm (3¾") when insetting into a standard, 16" fireplace opening. If inset depth is not available, an optional spacer frame is offered allowing for flush fitting against the back panel.

For further information on Burley's flueless gas fire technology, please view the flueless fact sheet here

 
Download Instructions
(Manufacturers instructions are offered as a guide only and may not always be the latest version)

Heater Type Gas - Flueless Gas Fire
Heat Input / Output 2.5kW
Efficiency 100%
Control Manual or Remote
Minimum Room Size 30m³
Air Vent Required Yes (minimum 100cm²)
Thermostat Yes
Catalytic Converter Yes
Fuel Effect 4240, 4242, 4244, 4248 Coal  /  4247 Pebble
Style Inset (Freestanding using optional spacer)
Warranty 1 Year
Burley Environ Width Height Depth
Overall Dimensions 518mm
(20½")
612mm
(24")
240mm
(9½")
Inset Dimensions 387mm
(15¼")
551mm
(21¾")
95mm*
(3¾")

*Optional spacer frame allows for freestanding installation without the need to inset

Burley flueless gas fires such as the Environ will be delivered using a Premier courier service. You will be contacted prior to delivery to book-in a suitable date shortly after placing an order.

Current delivery times for the Burley Environ is approximately 7-10 days however, this is dependant on stock levels at time of placing an order. Once an order is placed, we will contact you to advise if there is likely to be any delays on the estimated delivery time.