Gallery Richmond Agean Limestone / Cararra Marble Fireplace

With a mantel width of 1372mm (54"), the Gallery Richmond will work well in most room sizes creating a stunning focal point in classically inspired interiors. With the beauty of natural stone or luxurious marble, the Richmond is shown here with the striking contrast of the optional Bolton arched cast iron insert in highlighted finish and polished granite hearth.

Agean limestone is formed over millions of years and features subtle, random markings with warm, neutral tones. Each piece is unique and has been an extremely popular material for fireplace manufacture. It has matt, chalky finish which is smooth to touch and all limestone fireplaces in the Gallery range are delivered pre-sealed in order to minimise any marks created during installation.

Alternatively, the Richmond can be supplied in honed Cararra Marble with lovely, random grey markings against a lighter background. Marble products may have small amounts of colour-matched filler to give the impression of a continuous surface. The nature of marble is such that when it is formed in the earth, some small cracks are created too. The marble that is selected for Gallery Fireplace mantels have been chosen to provide affordable quality, thus some minor cracks have been permitted.

The optional Gallery Bolton is a decorative, arch cast iron panel with distinctive canopy which is suitable for combining with a variety of fire options. Complete with front bars and ashpan cover. Matt black finish with polished highlighted detail on the arch, front bars, ashpan cover and canopy.

The standard gas fire option when fitted with the dedicated cast back has a maximum gas input of 6.9kW meaning that an air vent in the room is not normally required. Authentic coal fuel bed with real, dancing flames provide beautiful feature that gives the impression of a real coal fire but with the convenience of gas. Classed as decorative effect only, these type of fires offer minimal heat performance.

The optional electric fire is designed especially for the Bolton insert and comprises of a moulded orange plastic tapered unit that fits inside the fire chamber and when switched on emits a welcoming glow with coal pieces for added realism. In addition to the LED glow only setting, there is a fan heater at the base of the appliance with 900W & 1800W heater output. Operated by remote control.

There is optional an optional dedicated cast back available with the Bolton fascia which is required if choosing the dedicated gas or electric fire. If fitting the Bolton with the optional slid fuel kit, you have the option of using the dedicated cast back or an existing clay fireback.

For anyone wanting to burn logs and coal, a solid fuel kit is also offered.

View optional hearths HERE