The Eko 5030 flueless gas fire is the perfect flat wall, no chimney solution to instant warmth that simply hangs on the wall. Eko Fires innovative technology provides a flexible design for your house or apartment, allowing you to install a fire not only in the living room, but also dining room, office, study, and kitchen. If you have a natural gas or LPG supply and can run a standard 8mm gas pipe to the fire installation point, while ensuring you have the minimum room size and adequate ventilation you can benefit from this technology.
Flueless fires incorporate the latest in gas fire technology and do not need a chimney or flue to operate. Instead, the combustion gases pass through a catalytic converter system, positioned at the top of the appliance, which converts carbon monoxide into harmless carbon dioxide and water vapour, levels of which are so low they are typically present in fresh air. In fact, the catalytic converter works so effectively that it can actually help to clean the air by neutralising airborne particles and odours, therefore helping to reduce household allergies.
The portrait dimensions of the Eko 5030 make it a popular choice for smaller wall spaces. A glass panel sits in front of a ribbon of flickering flames and as no heat is lost up a chimney or flue, it boasts 100% efficiency. It has a maximum heat output of 2kW and is operated by a discreet manual control at the bottom side of the appliance. A detachable polished brass effect trim surrounds the black frame.
(Manufacturers instructions are offered as a guide only and may not always be the latest version)